Which glazing can be used with MasterLine 10?

The published system range is 20–78 mm. Glass size, weight, hardware and structural verification must also be checked.

Which security class is available for MasterLine 10?

The published system status is WK2 to WK3. A resistance class applies only to the tested overall construction including glazing, anchoring and installation.

How is the whole-window U-factor for MasterLine 10 calculated?

It is calculated from frame and glass areas, the verified frame Uf value, glazing Ug value, glass-edge length, spacer Psi value and any mullions, transoms or special geometry.

Technical system data · reviewed 08/2026

Reynaers · aluminum windows

MasterLine 10
For passive-house and low-energy projects

A high-performance window solution for buildings with very high demands on energy efficiency, daylight and safety. Different design variants also allow concealed sashes.

Configure a window Technical resources

System-specific performance data
Visible revision status
For architects and specifiers

Profile section

Explore functional zones

System overview

Profile assembly

Published Uf value 0.99 W/(m²K)

Select the three markers to classify the profile assembly, glazing zone, seals and drainage.

Uw value

0.8 W/(m²·K)

Max. Height

2.800 mm

sash weight

200 kg

Security

WK3 Possible

Data status

reviewed 08/2026

System values; achievable performance and dimensions depend on opening type, glazing, hardware, profile combination and verified unit configuration.

01 · System performance

Published data in a transparent technical structure.

Every value remains assigned to its technical category, so thermal performance, dimensions, security, comfort and glazing can be reviewed without mixed marketing claims.

Property	System value	Category
Insulation
Thermal insulation – Uf	0.99 W/(m²·K)	Insulation
Thermal insulation – Uw	0.8 W/(m²·K)	Insulation
Basis of the Uw calculation	Frame-sash combination with Ug 0.6 W/(m²·K), warm edge, element size 1.23 × 1.48 m, 104 mm sightline and 48 mm glass.	Insulation
Comfort
Airtightness	Class 4 (600 Pa)	Comfort
Watertightness	Category E900 (900 Pa)	Comfort
Wind load resistance	Category C4 (1600 Pa)	Comfort
Acoustics – Rw (C; Ctr)	TuTi: 46 (−1; −4) dB; DC: 44 (−2; −4) dB	Comfort
Opening and closing resistance	Class 3	Comfort
Security
Burglary resistance	WK2 to WK3	Security
Maximum Dimensions & Weights
Sash height	600–2800 mm	Maximum Dimensions & Weights
Sash width	550–1200 mm	Maximum Dimensions & Weights
Max. sash weight	200 kg	Maximum Dimensions & Weights
Max. Glass weight	800 kg	Maximum Dimensions & Weights
Sightlines & profile depths
Minimum frame sightline, inward-opening	60 mm	Sightlines & profile depths
Minimum sash sightline, inward-opening	37 mm	Sightlines & profile depths
Minimum combined frame/sash sightline, inward-opening	104 mm	Sightlines & profile depths
Minimum frame sightline, outward-opening	27 mm	Sightlines & profile depths
Minimum sash sightline, outward-opening	113 mm	Sightlines & profile depths
Minimum combined frame/sash sightline, outward-opening	140 mm	Sightlines & profile depths
Minimum T-profile sightline	87 mm	Sightlines & profile depths
Profile depth, frame	97 mm	Sightlines & profile depths
Profile depth, sash	107 mm	Sightlines & profile depths
Profile depth, outer frame/sash	107 mm	Sightlines & profile depths
Glazing
Glass entry	27 mm	Glazing
Glazing method	Dry or wet glazing, interior glazing or glazing bead	Glazing
Glass thickness, frame/fixed glazing	20–78 mm	Glazing
Glass thickness, sash	30–88 mm	Glazing

Values are taken from the system-specific data already maintained on this website. The binding result is produced from the actual unit configuration.

02 · Profile construction

From profile section to verified project planning.

Profiles, glazing, seals and hardware are treated as one system. This separates published values from the items that require project-specific verification.

System platform

profile-dependent frame depth or profile-dependent construction.

Planning: frame, sash, mullion and meeting stile

Glazing

Published range: 20–78 mm.

Planning: build-up, weight, size and spacer

Seals and drainage

Air: Class 4 (600 Pa) · Water: Category E900 (900 Pa).

Planning: exposure and drainage

Hardware and security

Burglary resistance: WK2 to WK3.

Planning: opening type, weight and tested assembly

03 · Interactive tool

Estimate the whole-window U-factor with visible inputs and formula.

The calculator uses the published Uf input for the selected system, the glazing Ug value, the unit geometry and the spacer Ψ value.

System and geometry Window system Width mm Height mm Visible frame width mm

Glazing and spacer Glazing Ug value Spacer

Preliminary whole-window U-factorReynaers MasterLine 10

–W/(m²K)

Calculating

Window area A_w: –
Frame area A_f: –
Glass area A_g: –
Glass-edge length l_g: –

Formula and calculation

Uw = (Af × Uf + Ag × Ug + lg × Ψg) ÷ Aw

Preliminary planning value. Mullions, transoms, divided lites, special geometry, actual profile combinations and applicable project standards must be included in the binding calculation.

04 · Planning resources

CAD, sections and specifications in one logical area.

Existing resources link directly to the relevant content. CAD details that are not yet public can be requested with the selected system already identified.

PDF

System data

Technical data overview

All currently stored performance values

Current data status · 08/2026

→

PDF

Downloads

Product brochures and documents

Available manufacturer resources

Website document library

→

CAD

DWG / DXF

Request a CAD section

Coordinate the appropriate configuration and revision

System preselected

→

TXT

Specification

Request specification text

System-specific text with project parameters

For architects and specifiers

→

05 · Planning knowledge

Answers organized around real specification questions.

Frequently asked questions remain readable on the page and are also provided as structured FAQ data.

Which values are binding for MasterLine 10?

Only the values of the specifically engineered and verified unit configuration are binding, including profiles, size, opening type, glazing, hardware, anchoring and installation interface.

Which glazing can be used?

The published system range is 20–78 mm. A specific glass build-up also depends on size, weight, sash dimensions, hardware and structural verification.

Is WK2 to WK3 automatically included?

No. A resistance class only applies to the tested assembly of profiles, hardware, glazing, anchoring and installation. The required class must be specified for the project.

How is the binding whole-window U-factor determined?

From the frame share, Uf value of the actual profile combination, glazing Ug value, glass-edge length, spacer Ψ value and, where applicable, mullions, transoms and special geometry.

From system value to project-specific unit

Enter dimensions. Select the build-up.
Receive a project value.

The configurator connects technical system data with drawings, glazing and a project quotation request.

Configure MasterLine 10 Request planning support

MasterLine 10For passive-house and low-energy projects

Published data in a transparent technical structure.

Reynaers MasterLine 10

From profile section to verified project planning.

System platform

Glazing

Seals and drainage

Hardware and security

Estimate the whole-window U-factor with visible inputs and formula.

Enter window data

CAD, sections and specifications in one logical area.

Technical data overview

Product brochures and documents

Request a CAD section

Request specification text

Answers organized around real specification questions.

Enter dimensions. Select the build-up.Receive a project value.

MasterLine 10
For passive-house and low-energy projects

Enter dimensions. Select the build-up.
Receive a project value.